Foundations Settling? Our Revolutionary Systems to the Rescue!
Over time, our home’s foundation can unfortunately deteriorate, causing structural problems that should never be neglected. It is very important to identify the signs of foundation settlement and use the appropriate solutions. After exploring the signs of foundation settlement, we will briefly present our different patented systems for foundation repair and stabilization, explaining when each of these systems are most likely to be used.
Signs of Foundation Settlement
Foundation settlement is a problem that mainly occurs in areas with clay soil or in buildings with inadequate drainage systems.
The main signs to watch for:
- Cracks in interior walls.
- Doors and windows not closing properly or appearing to be stuck.
- Uneven floor or visible sagging in certain areas.
- Cracks in the foundation (often in a stair-step pattern).
- Visible inward tilting of foundation walls.
- Detachment of the chimney from the rest of the house.
If you observe one or more of these signs, it is likely that your foundation is facing settlement issues. Fortunately, Systèmes Sous-Sol Québec has solutions for every type of problem, thanks to patented systems designed to meet all specific foundation needs.
Foundation Repair Solutions by Systèmes Sous-Sol Québec
1. PushPiers System
The PushPiers system is an ideal solution for settling foundations that require deep stabilization. These robust support piers are driven deep into the ground until they reach stable soil or bedrock, on which the house can rest.
Key benefits:
- Provides permanent support for the house.
- Restores foundations to their original position.
- Installation relatively quick and minimally invasive.
2. SmartJack System
SmartJack beams are an adjustable solution for stabilizing weakened joists and sagging floors, primarily in crawl spaces. This system uses adjustable galvanized steel columns to lift sagging floors.
Key benefits:
- Adjustable system for precise leveling.
- Can be installed in crawl spaces and basements.
- Made with galvanized steel for long-lasting protection against corrosion.
3. CarbonArmor System
CarbonArmor is a wall reinforcement system that uses strong carbon fiber straps to stabilize cracked or weakened foundation walls. These straps are adhered to the wall and act as a strong reinforcement.
Key benefits:
- Installation relatively quick and minimally invasive.
- No excavation is required for installation.
- Effectively reinforces weakened walls without adding bulk or extra weight.
4. PowerBrace System
The PowerBrace system consists of galvanized steel beams designed to stabilize and straighten tilting foundation walls. These beams are installed against foundation walls and apply pressure to stop the tilting, and gradually restore the wall to its original position.
Key benefits:
- Stabilizes and gradually straightens foundation walls.
- No excavation is required for installation.
- Adjustable system to apply continuous pressure.
5. GeoLock System
GeoLock is an anchoring system using strong metal plates attached to foundation walls and connected to anchors buried in exterior soil. This system pulls the foundation walls outward to provide permanent support, stabilize them, and, over time, straighten them.
Key benefits:
- Allows severely tilting walls to be straightened.
- Durable system with buried anchors for maximum stability.
- Installation completed without major interior excavation.
Signs of foundation settlement should never be ignored. Each of our systems is designed to provide a customized solution depending on the type and severity of the problem. With the help of these systems, we can ensure long-term stability, no matter what the issue at hand.
Don’t let foundation problems worsen over time. Get your home inspected and find out which solution is best suited for a durable and effective result!
